ADJ ENCORE BURST 200

The ADJ Encore Burst 200 is an IPX4 rated, high intensity dual lens audience blinder/strobe. It’s powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array. The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.

Specifications: 
Light Source:

• 2x 110W Warm White CREE COB (Chip On Board) LEDs
• 2,700K Color Temperature (1,200K Tungsten Mode)
• 50-degree Beam Angle
• CRI: 81
• 12249 LUX @ 1M; 490 LUX @ 5M
• 50,000 Hour Average LED Life

Features:

• Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail system on the fixtures
• DMX Modes: 6
• Dimming Curve Modes: 6
• Dimming: 0 - 100% each module
• Pixel Control
• Strobe Effect
• Adjustable LED Refresh Rate (900-25,000Hz)
• Adjustable Gamma Brightness (2.0-2.8)
• With Wired Digital Communication Network

Connections:

• Data Input: 5pin DMX In/Out
• Power Input: Locking Power Cable In/Out (with protective rubber caps)
• Safety Cable Loop

Control:

• RDM (Remote Device Management)

Electrical:

• 100-240V 50Hz/60Hz (Auto Sensing)
• Power Linking: 4 Fixtures @120V | 8 Fixtures @240V
• Max Power Consumption: 235W

IPX4 Rated:

• X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture offers protection from a splash of water in any direction

Dimensions / Weight:

• Length: 7.9” (200.5mm)
• Width: 15.7” (400mm)
• Height: 8.5” (215.5mm)
• Weight: 15 lbs. (6.8kg)

Approvals / Ratings:

• CE Certified

ADJ Encore Burst 200 Cut Sheet.pdf
ADJ Encore Burst 200 User Manual.pdf
ADJ Encore Burst 200 Dimensions.pdf
ADJ Encore Burst 200 With Yoke Dimensions.pdf
ADJ Encore Burst 200 Yoke Bracket Dimensions.pdf
ADJ Encore Burst 200 Photometric Report.pdf