The AcoustiClip soundproof kit for stud walls is the best solution for internal stud walls. Restore quiet in your home with the AcoustiClip Stud Wall System, a complete kit combining materials to effectively sound insulate an internal wall against unwanted noise transfer between rooms, a high-performing solution against airborne and vibration sounds. These soundproof kits offer great value as they are discounted compared to buying the materials individually.

Reduce the highest noise level through stud walls with the AcoustiClip Stud Wall System. Stop sounds from passing between rooms in your home with the AcoustiClip Stud Wall Soundproofing System. Soundproof internal stud walls to prevent airborne and vibration transfer through lightweight interior stud walls. The AcoustiClip system decouples the frame from the new acoustic wall, ensuring excellent levels of noise reduction.

All AcoustiClip soundproof systems combine products with high mass, excellent sound absorption, and the decoupling effect of the AcoustiClip. The acoustic kits include the AcoustiClip and AcoustiChannel, acoustic insulation slabs, two layers of soundproof panels, a 15mm soundproof plasterboard, denser than standard board, and the 18mm Noisestop 1 Plus Panel. This panel features a 10kg mass-loaded vinyl acoustic membrane pre-bonded to the acoustic plasterboard. Additionally, the systems include acoustic sealant tubes to ensure effective acoustic sealing of the boards.

Materials supplied with this system:

• Acoustic insulation 50mm/60kg/m3 – High-density sound insulation slabs
• AcoustiClip – Sound isolation anti-vibration clip
• AcoustiChannel – Metal furring channel 1800mm
• Soundboard 15mm – High-density soundblock paperboard 1200mm x 1200mm (1.44sqm)
• Noisestop 1 Plus Panel 18mm –  12.5mm soundboard laminated with 10kg mass-loaded vinyl 1200mm x 1200mm (1.44sqm)
• Acoustic sealant 310ml

Select the required Total Wall Area from the dropdown box at the top of the page to see the quantities supplied with this system.

We recommend ordering areas individually and adding them to the basket rather than adding them to one large area. You can order multiple areas in the same order.

Quantity of materials supplied in your order

The quantity of clips and channels supplied in this kit has been calculated for a ceiling of up to 2.4m, which requires five rows. For walls over 2.4m, additional AcoustiClips and AcoustiChannel might be needed.

• System thickness 77mm (from the stud frame)
• Noise reduction 61dB (decibels explained
• Fire one hour

Thermal Resistance R:

• Acoustic plasterboard 12.5 mm = 0.050 m2 K/W
• Acoustic plasterboard 15.0 mm = 0.060 m2 K/W
• Mass-loaded vinyl 0.14 m² K/W
• Acoustic insulation 2.90 W/mK

Thermal Conductivity λR:

• Acoustic plasterboard 0.25 W/mK to BS EN 12524:2000
• Mass-loaded vinyl 0.037 W/mK
• Acoustic insulation 0.034 W/mK

Reaction to Fire

• Acoustic plasterboard 12.5mm & 15mm Euroclass A2-s1, d0
• Mass-loaded vinyl 10kg EN 13501-1 B-s2,d0 (2)
• Acoustic insulation EN13501-1: A1

Untreated stud wall DnT,w

Stud wall with 12mm plasterboard on either side 38db

Treated stud wall DnT,w

AcoustiClip Stud Wall System 61dB

Improvement DnT,w

Noise reduction with treatment 23dB

Note: Every 10 decibels(dB) reduction in noise level is roughly perceived as a halving of the perceived loudness. So, for instance, if you have a sound that measures 70dB and it decreases to 60dB, it would sound about half as loud to the human ear. Decibels explained.

• Fill the cavity of the stud frame with the DFM acoustic insulation slabs to reduce sound resonating inside the void.
• Screw the AcoustiClip into the stud frame. Space the clips vertically at 600mm centres with a row of clips 100mm from the bottom of the wall and 150mm from the ceiling. The clips should be no more than 1200mm apart horizontally (see the diagram below).
• Clip the AcoustiChannel into the clips, join the lengths of the channel by overlapping them by 100mm and screwing them together with 25mm self-tapping drywall screws. Screw the 15mm Soundblock plasterboard into the AcoustiChannel with 25mm self-drilling screws, and then fix the Noisestop 1 Plus Panel over the first layer of boards with 50mm self-drilling screws. Leave a 2-3mm gap around the wall’s perimeter to reduce noise transfer into the adjoining walls, ceiling and floor.
• Acoustic sealant is applied between each panel and the wall’s perimeter to ensure an airtight seal.
• Finish the soundproof system as you would standard plasterboard. The panels are supplied with tapered edges, which allows for dry lining or plastering.
• If you are reinstating electrical outlets, use acoustic putty pads inside the back boxes.

Spacing AcoustiClips

Horizontally – Fix an AcoustiClip at the start and end of each row. Acousticlips are spaced at a maximum of 1200mm centres along the AcoustiChannel.

Vertically – AcoustiClips are fitted a maximum of 600mm horizontally, 100mm from the floor and 150mm from the ceiling.

Product Brochure

Perfomance Data

Fitting

System Quantities

Due to the nature of most of the materials we supply, orders are typically delivered on pallets.

All orders will be wrapped, protected, and secured to the pallet to ensure they arrive in the best possible condition. Goods will be delivered as near to the property as possible. The drivers will not be able to carry orders into your property.

Deliveries are made between 8am and 6pm, Monday to Friday.

Once an order has been placed, you will be notified of the expected delivery date. Please ensure someone is available to sign for the delivery.

We charge a flat delivery rate of £60 plus VAT for palletised deliveries. We do not charge per pallet, no matter how many pallets are used to deliver your order.

Orders placed for items weighing less than 20kg will be sent via courier for £20 plus VAT.

We have a high stock level and typically deliver orders in approximately three to four working days.

If you want to speak to us regarding your delivery, please call 01423 339163.

Please check out our full delivery terms for more details.

Delivery Information